EINHELL CC-PO 1100/1 E Скачать руководство пользователя страница 29

Страница: 29 / 48

- 29 -

circumstances.

f) Wear suitable work clothes. Do not wear

loose clothing or jewellery. Keep hair, clo-

thes and gloves away from moving parts.

Loose clothing, jewellery or long hair can get

trapped in moving parts.

g) If vacuuming devices and draining de-

vices can be

tted, make sure that these

are correctly attached and correctly used.

The use of a dust extraction system can redu-

ce the danger posed by dust.

4. Usage and treatment of the electric tool

a) Do not overload the appliance. Use the

correct tool for your work.

You will be able

to work better and more safely within the gi-

ven performance boundaries.

b) Do not use an electric tool with a defec-

tive switch.

An electric tool that cannot be

switched on or o

ﬀ

is dangerous and must be

repaired.

c) Pull the plug out of the socket and/or

remove the battery before making any ad-

justments to the appliance, changing ac-

cessories or put the appliance down.

This

safety measure prevents starting the electric

tool unintentionally.

d) Keep unused electric tools out of the

reach of children. Do not allow people

who are not familiar with the appliance or

who have not read these instructions to

use the appliance.

Electric tools are dange-

rous if they are used by inexperienced people.

e) Clean your electric tool carefully. Check

whether moving parts are functioning

properly and not jamming, whether parts

are broken or damaged enough that the

functioning of this electric tool is a

ﬀ

ec-

ted. Damaged parts must be repaired be-

fore using the appliance.

Many accidents

are caused by badly maintained electric tools.

f) Keep your cutting tools sharp and clean.

Carefully maintained cutting tools with sharp

cutting edges will jam less and are easier to

control.

g) Make sure to use electric tools, accesso-

ries, spare parts, etc. in accordance with

these instructions. Take the conditions

in your work area and the job to perform

into account.

Using electric tools for any

purpose other than the one for which they are

intended can lead to dangerous situations.

5. Service

a) Have your electric tool repaired only by

trained personnel and/or the authorized

service agent, using only genuine spare

parts

. This will ensure that your electric tool

remains safe to use.

Special safety information

a) This electric tool is designed for use as a

sander and polisher. Obey all the safety inst-

ructions, general instructions, illustrations and

data supplied with the tool. If you fail to obey

the following instructions, you may su

ﬀ

er an

electric shock,

re and/or serious injuries.

b) This electric tool is not suitable for grinding,

cutting-o

ﬀ

or working with wire brushes. Use

of the electric tool in ways it was not intended

could lead to dangerous situations and inju-

ries.

c) Do not use any accessories which have not

been designed and recommended by the

manufacturer speci

cally for this electric tool.

Just because you can attach an accessory to

your electric tool, this does not guarantee that

you can use it safely.

d) The maximum speed of the plug-in tool must

be at least as high as the maximum speed

speci

ed on the electric tool. Accessories

which rotate faster than the maximum speed

may break and be catapulted out of the tool.

e) The external diameter and thickness of the

plug-in tool must comply with the dimension

speci

cations of your electric tool. Plug-in

tools of the wrong size cannot be adequately

screened or checked.

f) Grinding

wheels,

anges, grinding disks or

other accessories must

t precisely on the

grinding spindle of your electric tool. Plug-in

tools which do not

t exactly on to the grin-

ding spindle of the electric tool will rotate

irregularly, vibrate a great deal and may result

in you losing control.

g) Do not use damaged plug-in tools. Before

use, check plug-in tools such as grinding/san-

ding wheels for splintering and cracks, grin-

ding/sanding disks for cracks, wear or heavy

wear, and wire brushes for loose or broken

wires. If the electric tool or the plug-in tool is

dropped, check whether it is damaged or use

an undamaged plug-in tool. When you have

checked and

tted the plug-in tool, make sure

that you and other persons in the vicinity are

not on a level with the rotating plug-in tool and

allow the electric tool to run for one minute at

maximum speed. Damaged plug-in tools will

Anl_SA_CC_PO_1100_1_E_SPK8.indb 29

29.04.2020 07:04:29

Содержание CC-PO 1100/1 E

















































Результаты поиска

Содержание CC-PO 1100/1 E

Отзывы:

Бренды по названию

Популярные бренды

EINHELL CC-PO 1100/1 E, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание CC-PO 1100/1 E

Отзывы:

Бренды по названию

Популярные бренды