GB
- 18 -
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
Explanation of the symbols used (see Fig. 13)
1.
Danger!
- Read the operating instructions to
reduce the risk of injury.
2.
Caution! Wear ear-mu
ff
s.
The impact of noi-
se can cause damage to hearing.
3.
Caution! Wear a breathing mask.
Dust
which is injurious to health can be generated
when working on wood and other materials.
Never use the device to work on any materi-
als containing asbestos!
4.
Caution! Wear safety goggles.
Sparks ge-
nerated during working or splinters, chips and
dust emitted by the device can cause loss of
sight.
5. Blade cutting direction
6. Store the batteries only in dry rooms with
an ambient temperature of +10°C to +40°C.
Place only fully charged batteries in storage
(charged at least 40%).
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
WARNING!
Read all safety warnings, instructions, illust-
rations and speci
fi
cations provided with this
power tool.
Failure to follow all instructions listed
below may result in electric shock,
fi
re and/or
serious injury.
Save all warnings and instructions for future
reference.
2. Layout and items supplied
2.1 Layout (Fig. 1-10)
2. Blade
guard
3. On/O
ff
switch
4. LED
lamp
5. Safety
lock-o
ff
6. Battery (not included in delivery)
7. Charger (not included in delivery)
8. Pushlock
button
9. Battery capacity indicator
10. Adjustable handle
11. Clamping lever for handle
12. Nut on the handle
13. Workpiece stop
14. Socket head screws for workpiece stop
15. Blade
16. Clamp lever
17. Top blade guard
18. Blade pulley
19. Rubber tire
20. Guide rollers
21. Additional blade
22. 4 mm hex key
23. 5 mm hex key
2.2 Items supplied
Please check that the article is complete as
speci
fi
ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or su
ff
ocating!
•
Cordless bandsaw
•
Additional blade
•
4 mm hex key
•
5 mm hex key
•
Original operating instructions
•
Safety instructions
Anl_TE_MB_18_127_Li_SPK13.indb 18
Anl_TE_MB_18_127_Li_SPK13.indb 18
13.09.2022 14:38:56
13.09.2022 14:38:56
