background image

GB

- 10 -

10.  Charger indicator

 Indicator status

 Explanations and actions

 Red LED

 Green LED

 O

  

Flashing

  Ready for use

The charger is connected to the mains and is ready for use; there is no 

battery pack in the charger

 On

 O

 

Charging

The charger is charging the battery pack in quick charge mode.

 O

 

 On

The battery pack is fully charged (charging completed)

Action: 

Take the battery pack out of the charger. Disconnect the charger from 

the mains supply.

 Flashing

 O

 

Adapted charging

The charger is in gentle charging mode. For safety reasons the char-

ging is performed less quickly and takes more than 1 hour. The rea-

sons can be: 

-   The battery pack has not been used for a very long time or an alrea-

dy 

fl

 at battery was further discharged (exhaustive discharge) 

-  The battery pack temperature is outside the ideal range (between 

10° C and 45° C).

Action: 

Wait for the charging to be completed; you can still continue to charge 

the battery pack.

Flashing

Flashing

Fault

Charging is no longer possible. The battery pack is defective.

Action: 

Never charge a defective battery pack. Take the battery pack out of the 

charger.

 On

 On

Temperature fault

The battery pack is too hot (e.g. due to direct sunshine) or too cold 

(below 0° C).

Action: 

Remove the battery pack and keep it at room temperature 

(approx. 20° C) for one day.

Anl_TC-CD_12-2_Li_SPK7.indb   10

Anl_TC-CD_12-2_Li_SPK7.indb   10

07.04.2017   08:35:26

07.04.2017   08:35:26

Содержание 42.572.31

















Отзывы: