GB
- 7 -
4. Technical data
Voltage supply ........................................12 V d.c.
Idling speed: ............................0-350/0-1300 rpm
Torque settings: ........................................... 19+1
Forward and reverse rotation ..........................yes
Chuck clamping width ............................ 1-10 mm
Battery charging voltage .........................12 V d.c.
Battery charging current......................... 1500 mA
Mains voltage for charger ............... 230 V ~ 50 Hz
Battery type: ................................................ Li-Ion
Number of battery cells: ..................................... 3
Battery capacitance: .................................. 1.5 Ah
Weight.........................................................1.1 kg
Max. screw diameter: ................................. 6 mm
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level ..................... 66.8 dB(A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level ....................... 77.8 dB(A)
K
WA
uncertainty .............................................3 dB
Wear ear-mu
ff
s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Drilling in metal
Vibration emission value a
h
≤
2.5 m/s
2
K uncertainty = 1.5 m/s
2
Screwing without hammer action
Vibration emission value a
h
≤
2.5 m/s
2
K uncertainty = 1.5 m/s
2
Warning!
The speci
fi
ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the speci
fi
ed value
in exceptional circumstances.
The speci
fi
ed vibration value can be used to
compare the equipment with other electric power
tools.
The speci
fi
ed vibration value can be used for initi-
al assessment of a harmful e
ff
ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before starting the equipment
Be sure to read the following information before
you use your cordless screwdriver for the
fi
rst
time:
1. Charge the battery pack with the charger sup-
plied.
2. Only ever use sharp drill bits and screwdriver
bits which are suitable for the purpose and in
faultless condition.
3. Always check for concealed electric cables
and gas and water pipes when drilling and
screwing in walls.
6. Operation
6.1 Charging the LI battery pack (Fig. 2-3)
The battery is protected from exhaustive dischar-
ge. An integrated protective circuit automatically
switches o
ff
the equipment when the battery is
fl
at. In this case the bit chuck will cease to turn.
Anl_TC-CD_12-2_Li_SPK7.indb 7
Anl_TC-CD_12-2_Li_SPK7.indb 7
07.04.2017 08:35:26
07.04.2017 08:35:26
