Important notes
●
Attention: Before assembly and starting
operation, read the operating instructions
carefully.
●
Check that the mains voltage corresponds to
the details on the type plate.
●
Only connect to a proper 230 volt, 50/60 Hz
erthed socket.
●
Minimum fuse protection 10 A,
●
Pull the mains plug out of the socket when:
- the unit is not in use,
- before opening the unit,
- before cleaning and maintenance
●
Never clean with solvents.
●
Do not use the cable to pull the plug out of
the socket.
●
When unit is ready for use, do not leave
unattended.
●
Safeguard from children
●
Care must be taken that the mains
connection lead is not damaged by being
driven over, crushed, stretched, etc.
●
The unit must not be operated if the mains
connection lead is not in perfect condition.
●
Replacement mains connection leads must
not differ from the versions indicated by the
manufacturer
Mains connection cable: H 05 VV - F 2 x 1
mm
2
●
On no account vacuum:
burning matches, glowing ashes and
cigarette ends, inflammable, corrosive, fire
hazard or explosive substances, vapours and
liquids.
●
This unit is not suitable for vacuuming dust
which is damaging to health.
●
Store the unit in a dry place.
●
Do not operate a defective unit.
●
Servicing only by an authorized after-sales
service point.
●
Use only for operations for which the unit is
intended.
●
Take great care when cleaning stairs.
●
Use only manufacturerʼs attachments and
spare parts.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
1. Items supplied
1 Handle
2
Mode selector switch / ON/OFF switch
3 Head
4 Filter
basket
5
Safety float valve
6 Hook
fastener
7 Tank
8 Hose
connector
9 Rollers
10 Flexible hose
11 Cable holder
12 Connection bracket
13 Large suction nozzle
14 Dirt bag
15 Foamed plastic filter
16 Crevice nozzle
17 Foam nozzle
18 Small vacuum nozzle
19 Paper filter
20 Wheels
21 Cleaning product hose connector
22 Cleaning product hose connection nipple
23 Accessory mount
24 Spray nozzle for cleaning product
25 Cleaning product tank
26 Suction tube
27 Suction tube with holder
28 Holder for spray device
29 Pull control
2. Assembling the wheels (Fig. 2-4)
앬
Fasten the wheels (20) as shown in Fig. 2.
앬
Slide the castors (9) into the appropriate
recesses and secure them using the screws
(a) supplied.
3. Assembly as a washing vacuum
cleaner (Figure 6 – 14)
앬
Connect the connection brackets (12) to the
vacuum cleaner
앬
Fit the suction tube (26) to the foam nozzle
(17).
앬
Secure the spray nozzle for cleaning products
(24) to the foam nozzle (17).
앬
Connect suction tube (26) to suction tube
(27).
앬
Secure the spray device for cleaning products
(23) to the holder (30).
앬
Connect the flexible hose (10) to the
GB
8
Anleitung RNS 1250_SPK1:Anleitung Duo 1250-1 SPK 1 25.01.2007 8:16 Uhr Seite 8
