Eiki LC-X80 Скачать руководство пользователя страница 59

Страница: 59 / 80

Turn off the projector and unplug the AC power cord. Let

the projector cool for at least 45 minutes.

Open the filter cover. (p.57)

Follow these steps to replace the lamp.

✔

Note:

• Be sure to insert the lamp in the correct direction.
• Do not reset the Lamp counter when the projection lamp is

not replaced.

Lamp Replacement

For continued safety, replace with a lamp of the

same type. Do not drop the lamp or touch the

glass bulb! The glass can shatter and may cause

injury.

Allow a projector to cool for at least 45 minutes

before you open the lamp cover. The inside of the

projector can become very hot.

CAUTION

When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the

screen and LAMP REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing

when the LAMP REPLACE indicator should light is depending on the lamp mode.

Top Panel

LAMP REPLACE indicator

Lamp replacement icon

✔

Note:

• The Lamp replacement icon will not appear when

the Display function is set to “Off” (p.48), during
“Freeze” (p.28), or “No show” (p.29).

Lamp

Handle

Lamp cover

Filter cover

Screw

Maintenance and Care

Loosen the screw and open the lamp cover. Pull out the

lamp by using the built in handle.

Replace the lamp with a new one. Make sure that the

lamp is properly and fully inserted.

Connect the AC power cord to the projector and turn on

the projector.

Reset the Lamp counter

(p.60)

Close the lamp cover and secure the screw.

Close the filter cover.

Содержание LC-X80

















































































Результаты поиска

Содержание LC-X80

Отзывы:

Похожие инструкции для LC-X80

Бренды по названию

Популярные бренды

Eiki LC-X80, Руководство пользователя

Результаты поиска

Содержание LC-X80

Отзывы:

Похожие инструкции для LC-X80

Бренды по названию

Популярные бренды