Select the desired screen size that conforms to the input
signal source.
Screen Menu
Provide the image within a screen size keeping its original
aspect ratio.
Note:
• The projector cannot normally display
any resolution higher than 1920 x
1200.
• The image data other than 1920 x
1200 is modified to fit the screen size in
initial mode.
•
Full, Zoom, True, Custom adj. and
Digital zoom +/– cannot be selected
when no signal is detected in the PC
System Menu. (p.36)
1
2
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select
Screen
and then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons select the desired item
and then press the SELECT button.
To reset the adjusted data, select
Reset
and press the
SELECT button. A confirmation box appears and then
select
yes
. All adjustments will return to their previous
figures.
To store the adjusted data, select
Store
and press the
Point ► or the SELECT button. Use the Point ▲▼ buttons
to select one from Image 1 to 10 and press the SELECT
button.
A confirmation box appears and then select
yes
. Stored
data can be called up by selecting an
Image (1-10)
in the
Image Mode Selection on page 40.
A confirmation box appears
and then select
yes
.
Store
Computer Input
Reset
Store
Screen Size Adjustment
Normal
Provide the image in its original size. When the original
image size is larger than the panel size (1920 x 1200)
and 16:9 or 4:3 is selected in Screen aspect, the
projector goes to the panning mode automatically.
Use the Point ▲▼◄► buttons to pan the image. When
adjusted, the arrows will turn red. When reaching to the
correction limits, the arrows will disappear.
Scale the image proportionally to fit the entire screen.
Either side of image may go over the screen.
True
Zoom
Provide the image to fit full screen size.
Full
Provide the last stored aspect screen image.
Custom
Provide the image at the 16:9 wide screen ratio.
Wide (16:9)
42
