Basic Operation
For detailed functions of each menu, see “Menu Tree” on pages 76-78.
Main Menu
Sub-Menu
Image select
For computer source, used to select an image level among
Dynamic
,
Standard
,
Real
, and
Image 1-10
(p.40).
For Video source, used to select an image level among
Dynamic
,
Standard
,
Natural, Cinema
, and
Image 1-10
(p.46).
Image adjust
For computer source, used to adjust the computer image. [
Contrast
/
Brightness/Iris
/
Color temp .
/
White
balance (R/G/B)
/
Offset(R/G/B)
/
Sharpness
/
Gamma/Reset
/
Store
] (pp.41-42).
For video or HDMI source, used to adjust the video image. [
Contrast
/
Brightness
/
Color/Tint/Iris
/
Color
temp .
/
White balance (R/G/B)
/
Offset (R/G/B)
/
Sharpness
/
Gamma
/
Noise Reduction
/
Progressive/
Reset
/
Store
] (pp.47-48).
PC adjust
Used to adjust the parameters to match with the input signal format (pp.37-39).
Screen
For computer source, used to adjust the size of the image. [
Normal
/
Full
/
Wide(16:9)
/
Zoom/True
/
Custom
/
Custom adj .
/
Digital zoom +/-
/
Keystone
/
Ceiling
/
Rear
/
Screen aspect
/
Reset
] (pp.42-44).
For video or HDMI source, used to adjust the size of the image. [
Normal
/
Full
/
Wide(16:9)
/
Zoom/Natural
Wide/Custom
/
Custom adj .
/
Keystone
/
Ceiling
/
Rear
/
Screen aspect/Reset
] (pp. 49-50).
Input
Used to select an input source (
Input 1
,
Input 2
,
Input 3
or
Network
) (p.33).
Note
:
Network will not be displayed when optional Pj-to NetDirector is not attached.
Sound
Used to adjust the volume or mute the sound (p.28).
Information
Display the input source information:
Input
,
System
,
H-sync freq .
,
V-sync freq .
,
Screen
,
Language
,
Lamp status
,
Lamp counter
,
Filter counter
,
Power management
,
Key lock
,
PIN code lock
,
Shutter
management
,
Simple mode
,
Remote control
and
SERIAL NO .
(p.29).
Guide
The key operation is displayed.
Setting
Used to set the projector’s operating configurations (pp.51-65).
Network
See the owner’s manual of “Network Set-up and Operation”.
Main Menu
26
