Eiki LC-WB200, Руководство пользователя

Страница: 34 / 80

34
Computer Input
Screen Setting
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select Screen and then press the Point ►
button or the SELECT button.
Use the Point ▲▼ buttons to select the
desired item and then press the SELECT
button.
This projector has the picture screen resize function, which enables you to customize the image size.
Screen Menu
Provide the image to fit the screen size.
Normal
True
Provide the image in its original size. When the
original image size is larger or smaller than the
screen size (1280 x 800), the projector enters
to the panning mode automatically. Use the
Point ▲▼◄► buttons to pan the image. When
adjusted, the arrows will turn blue. When reached
to the correction limits, the arrows will disappear.
Full
Provide the full screen image.
 Note:
• This projector cannot display any resolution
higher than 1920 x 1200. If your computer’s
screen resolution is higher than it, reset the
resolution to the lower before connecting to
the projector.
• The image data in other than 1280 x 800
is modified to fit the screen size in initial
mode.
• True and Digital zoom +/– are disabled
and cannot be displayed when 480i ,
575i , 480p , 575p, 720p , 1035i or 1080i is
selected in the PC System Menu (p. 28).
• When True is selected in the Screen menu,
Digital zoom +/- can not be selected.
1
2
Custom
Provide the last stored aspect screen image.
Wide (16:9)
Provide the image at the 16:9 wide screen ratio.
Adjust the screen scale and position manually with
this function. Press the Point ► button at Custom
adj . and the Custom adjustment menu is displayed
on the screen, you can use the Point ▲▼ buttons
to choose the item you want to adjust.
Scale H/V ...... Adjust the Horizontal/Vertical
screen scale.
H&V ............... When set to On , the aspect
ratio is fixed. The Scale V
appears dimmed and becomes
unavailable. Adjust Scale H , then
the screen scale is automatically
modified based on the aspect
ratio.
Position H/V .. Adjust the Horizontal/Vertical
screen position.
Common ....... Save the adjusted scale or
position to all the inputs. Press
the SELECT button at Common
to display a confirmation box. To
save the scale or position, press
the SELECT button at Yes . When
Custom is selected, the saved
scale or position is used.
Reset ............. Reset the all adjusted values.
Press the SELECT button at
Reset to display a confirmation
box. To reset, press the SELECT
button at Yes .
Custom adj .

Note:
• When no signal is detected, Normal is set
automatically .
• The adjustable range for Scale H/V and
Position H/V
is limited depending on the input
signal.
Zoom
Scale the image proportionally to fit the entire
screen. Either side of image may go over the
screen.
Custom adj .