Basic Operation
27
Choose either
Computer 1 (RGB)
or
Computer 2 (RGB)
by pressing the COMPUTER 1 or
COMPUTER 2 button on the remote control. Or you can press the INPUT button on the top control to
choose the desired input source.
Before using these buttons, correct input source should be selected through Menu operation as
described below.
1
Input Menu
2
3
Note:
When the Input search function is set to
On 1
or
On 2
in the Auto setup function, the input signal
will be searched automatically (p.45).
Computer 1
Remote control
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select
Input
and then press the
Point
►
button or the SELECT button.
Use the Point ▲▼ buttons to select
Computer 1
.
When
Computer 1
is selected, press the
Point
► button
to access the submenu
items
. Use the Point ▲▼ buttons to select
the
RGB
input source and then press the
SELECT button.
Computer 1(Scart)
Input Source Selection (RGB: Computer 1/Computer 2)
Computer 2 (RGB)
Direct Operation
Menu Operation
Computer Input
OR
Use the Point ▲▼ buttons to select
Computer 2
and then press the SELECT
button.
COMPUTER 1 button
COMPUTER 2 button
Computer 1(RGB)
INPUT button
Top Control
