—
38
—
DLP Projector — Owner’s Manual
Setup Menu
Press the [Menu] button to open the OSD menu. Press the [
p
]/[
q
] button to select
Setup
and press the
[Enter] button to enter the
Setup
menu. Press the [
p
]/[
q
] button to select the menu option and press
the [Enter] button to enter its submenu. Press the [
p
]/[
q
]/[
t
]/[
u
] button to select or adjust the desired
settings and press the [Enter] button
to confirm.
Light Source Mode
Lens Function
Test Pattern
High Altitude
12V Trigger
Remote Settings
Display Mode Lock
Keypad Lock
HDBaseT Control
Network Control
Setup
Constant Power
Off
OFF
OFF
OFF
OFF
Note:
Images shown are for illustration purpose only.
I
tem
D
escrIptIon
Light Source Mode
Select the light source mode:
Constant Power, Constant Luminance, ECO1, ECO2, and ECO3.
Lens Function
Configure the lens function related settings.
See "Lens Function" (page 40) for details.
Test Pattern
This function is used to set the internal test signal:
Green grid, Magenta grid, White grid, White, Red, Green, Blue, Black, Gray
scale, Color bar, and Raster Gray.
High Altitude
When “On” is selected, the fans will spin faster. This feature is useful in
high altitude areas where the air is thin.
12V Trigger
When “On” is selected, the 12 trigger Din will output the Active Pulse to
initial outside equipment.
Remote Settings
Configure the remote control related settings.
See "Remote Settings" (page 41) for details.
Display Mode Lock
Choose “Off” or “On” to lock or unlock adjusting the display mode settings.
Keypad Lock
Choose “Off” or “On” to lock or unlock the keypad function.
HDBaseT Control
Choose “Off” or “On” to lock or unlock the RS232 settings.