—
32
—
DLP Projector — Owner’s Manual
I
tem
D
escrIptIon
H. Position
Move the image right or left within the area of available pixels (VGA signal).
•
Press the [
t
] button to move the image left.
•
Press the [
u
] button to move the image right.
V. Position
Move the image up or down within the area of available pixels (VGA
signal).
•
Press the [
t
] button to move the image down.
•
Press the [
u
] button to move the image up.
Frequency
Changes the display data frequency (VGA signal) to match the frequency
of your computer’s graphic card. When you experience a vertical flickering
bar, use this function to make an adjustment.
Tracking
Synchronizes the signal timing (VGA signal) of the display with the
graphics card. If you experience an unstable or flickering image, use this
function to correct it.
Edge Mask
Use this function to remove the video encoding noise on the edge of video
source.
Digital Zoom
Use to reduce or magnify an image on the projection screen.
Projection Mode
Select the preferred projection:
Front, Front Ceiling, Rear, and Rear Ceiling.
Image Shift
Use this function to shift the image horizontally or vertically.
Geometric Correction
Configure the image correction settings.
See "Geometric Correction" on page 33.
PIP/PBP
Configure the PIP/PBP settings. See "PIP/PBP" on page 34.
