Eiki EK-306U, Руководство пользователя

Страница: 25 / 43

48 49
Security
Expand
This function allows you to use the PIN code
lock and PIN code change functions to set the
security for the projector operation.
PIN code lock
This function prevents the projector from
being operated by unauthorized persons
and provides the following setting options for
security.
Off .... Unlocked.
On .... Enter the PIN code every time
turning on the projector. If you
want to change PIN code lock
setting or PIN code, you must
enter the PIN code. The default
PIN code is "111".
Security
If you want to change the PIN code lock setting, press the OK button, then PIN code dialog box
appears.
Press ◄► button to select a number, and then press the OK button to enter this number, the
cursor automatically moves to next box. If you fixed an incorrect number, press MENU button to
reset it again.
Repeat this step to complete entering a three-digit number.
After entering the three-digit number, the cursor automatically move to "Set", and press the OK
button, then you can change the PIN code lock setting.
If you entered an incorrect PIN code, the number (***) turn red, it will be reset automatically within
one second. Enter the correct PIN code all over again.
PIN code change
The PIN code can be changed to three-digit number. Press

button to select PIN code change.
Pin code dialog box appears, Press ◄► button to enter the correct code. The New PIN code input
dialog box appears. Set a new PIN code.
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN CODE, WRITE DOWN THE NEW PIN CODE
IN COLUMN OF THE LOGO PIN CODE NO. MEMO ON PAGE 82, AND KEEP IT SECURELY.
SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING
CAN NO LONGER BE CHANGED.
Expand
This function is used to set a frequency for filter
cleaning.
When the projector reached a specified time
between cleanings, a Filter warning icon
appears on the screen, notifying the cleaning
is necessary. After cleaning the filter, be sure
to select RESET and set the timer. The Filter
warning icon will not turn off until the filter
counter is reset.
Filter counter
Display the using time of the filter.
Timer
Set the time to display the warning icon.
Filter counter reset
Reset the filter counter.
Filter counter
Filter counter
For reducing power consumption as well as
maintaining the lamp life, the Power management
function turns off the projection lamp when the
projector is not operated for a certain period. Select
one of the following options:
Ready
When the lamp has been fully cooled down, the
POWER indicator changes to green blinking. In this
condition, the projection lamp will be turned on if
the input signal is reconnected or any button on the
remote control or top control is pressed.
Shut down
When the lamp has been fully cooled down, the power
will be turned off.
Off
Power management function is off.
Timer
If the input signal is interrupted and no button is
pressed for more than 30 seconds, the timer display
with No signal appears. It starts the countdown until
the lamp is turned off. Press

button to set the
Timer(1~30min.)
Ready countdown
Set the time that ready status transfers to standby
status automatically.(0-30min. 0 Min: not transfer
automatically)
In ready status, press POWER button to switch to
standby status, and press any other button to turn on
the projector.
Power management

Note:
Factory default: "Timer: 5 min",
"Ready countdown: 5 min".
Power management
No signal
01 : 20
Time left before Lamp is off.
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter