Eiki EK-1100LU, Руководство пользователя

Страница: 81 / 92

81
Appendix
Some operations are
invisible
– Check the display function.
Auto PC Adjusting
function failure
– Check input signal. Auto PC Adjusting function is disable in 480p,
576p, 720p, 480i, 576i, 1080i or 1080p mode.
Settings do not save after
power off
– Make sure you have selected Store after settings adjustment.
Some settings do not keep without selecting with Store.
Power management
failure
– In case of Freeze or Blank operation, the power management
function does not work.
Auto Setting does not
work
– Make sure it is not set to "Off" in each setup menu.
Image distorted or
disappeared
– Check and revise the PC Adj. menu or Screen menu.
A password prompt
displays after power on
– You have set up the Logo PIN Code lock function
Remote controller does
not work
– Check the battery.
– Make sure there is no obstacles stand in between your projector
and the remote controller.
– Make sure the remote controller is not too far away from your
projector. The maximum operation range is 5m.
– Make sure the remote controller and your projector are paired with
the same remote control code.
– Disable the key lock of the remote controller in the Security menu.
Light indicator turns on or
flashes
– Check status of your projector according to the light indicator
status.
Exclamation mark
displays
– Invalid operation, please operate your projector correctly.
Control panel does not
work
– Disable the key lock on control panel function in the Security menu.
Cannot disable the Logo
Select password, Key
Lock, and PIN Code lock
function
– Please call your dealer or contact the service center.
– Make sure your projector is correctly connected to external equipment.
– Make sure all devices have plugged in an AC power source and have been powered on.
– If your projector fails to project image of the connected computer, restart the computer.
Warning:
Your projector employs high voltage power for operation. Do not open its casing.
If the problem persists, call your dealer or service center. Along with model number of your
projector and a description to your problem. You will be advised on getting our services.