Eiki EK-1100LU, Руководство пользователя

Страница: 77 / 92

77
Regular maintenance
Status indicator
The status indicator shows status of projector protection function. Check STATUS and POWER
indicator for good maintenance operation.
Note:
Unplug the AC power cord in case of any abnormality as it may lead to fire or electric
shock.
The projector turns off and the status light indicator flashes red.
Your projector powers off and the status light indicator turns orange.
Your projector powers off automatically to protect components within it when it is overheated. The
POWER indicator flashes red when your projector is cooling down. Press the STANDBY button to
power your projector on again when it is cooled down to normal operation temperature.
Check the following:
– Is adequate clearance provided for your projector’s ventilation? Check the installation status
and any air outlet block.
– Is your projector installed at location close to outlet of air conditioning equipment? Keep your
projector away from air outlet of air conditioning equipment.
– Is the filter in clean condition? Please clean the filter regularly.
The STATUS indicator turns orange and your projector powers off to protect its internal compo-
nents whenever an abnormality is detected. Unplug the AC power cord and connect again. Restart
your projector and run checkup routine. If the problem persists, unplug the AC power cord and call
your service center for checkup and maintenance.
The status indicator
flashing red
The status indicator
flashing orange
Note:
The POWER indicator stops flashing when your
projector’s internal temperature cooled down to
normal and it is powered on again.