Eiki EK-1100LU, Руководство пользователя

Страница: 30 / 92

30
Remove the lens
1 Centering the lens by select the "Lens
cernter" from the OSD or keep press the
"Lens shift" button on the remote control
over 4 seconds.
2 Power off your projector and unplug the
AC power cord.
Wait for a while till the projector chassis
has cool down.
3 Press and hold the lens release button.
Turn the lens counter clockwise till it
release, and then pull it out of your pro-
jector gently.
Installing lens
1 Remove the Dust Proof Cover as the first
time installation.
Align the hook on your lens and the gap
at the projector then insert the lens into
the projector.
2 Turn the lens clockwise slowly until you
hear a click. Make sure the lens is fully
inserted in your projector.
Installation
Lens installation
Please follow steps given below to install lens after its replacement or when optional ones are
employed. Please consult your dealers for details on optional lenses.
Note:
Be careful in removing the lens.
Do not drop it.
Note:
Do not press and hold the lens
release button while installing lens.
●
Do not touch or remove any other component except the lens and parts related to it. Otherwise,
you may experience product failure, electric shock, fire, or other incidents.
●
Make sure model of the lens is compatible with your projector before installing it.
●
For details on lens and its installation, please call local dealers.
●
When replacing the optional lenses, it must be done by qualified personnel. Pay attention to
mechanical hazards and high temperature injuries during replacement.
●
For details of lens and the installation, please contact your dealers.
●
For safety reasons, please ensure power off while replacing the optional lens to avoid electric
shock fire and other accidents.