39
Auto image Adjust
Set the timing of the Auto image Adjust function for(Resync on
page 41
) below 3
modes:
■
Off:
Auto image function is not executed.
■
Auto:
Use the parameters that users used last time.
The adjusted parameters are stored in the projector, 5 resolution data for each digital
and analog inputs. If there is no record of parameters, auto image function will be
executed.
■
Always:
Auto image function is executed automatically when the input source is
selected.
OSD Operation-PICTURE
Contrast
Use ◄ or ► to adjust the contrast of the projected image. Adjustable value: 0 to 200.
Note:
Brightness and Contrast controls are interactive. The screen change to one may require a subtle
change to the other in order to achieve the optimum setting.
Brightness
Use ◄ or ►to adjust the level of black in the image to increase or decrease image
brightness. Adjustable value: 0 to 200.
Sharpness
Use ◄ or ► to adjust the adjustment of sharpness primarily changes the value of high
frequency detail. Adjustable value: 0 to 200.
