EIDER 7718-000, Руководство по эксплуатации

Страница: 17 / 29

Operating Instructions for Shearing Clippers
EG 718 “Equus” Item no. 7718-000
1 Designated use
1.1 Overview / operating components
Parts and names
1 Upper blade 10 Reduction gear 19 Stator
2 Lower blade 11 Pressure spring 20 Brushes
3 Tension adjusting screw 12 Clipper head 21 Bearing
4 Swivel spring 13 Centring sleeve 22 Bend protection sleeve
5 Swivel lever 14 Motor part 24 ON/OFF switch
6 Crank bearing 15 Capacitor 26 Blade fastening screw
7 Crank square 16 Cord
8 Crank 17 Air filter
9 Toothed gear 18 Rotor
1.2 Intended use
The shearing clippers are exclusively for shearing of cattle and horses. The scope of application
may be extended to sheep, goats and camelids by interchanging the standard clipper head.
Use of the clippers for any other purposes, especially for use on people, is strictly prohibited.
Note: Attention: Risk of jamming! The clippers may not be operated without fitted blades.
1.3 Technical data
Type designation: EG 718 “Equus”
Supply voltage: 230-240 Volt ~ 50 Hz
Input power: 330 Watt
Motor output (rated output): 200 Watt
RPM:
2 800 rpm
Required fuse: max. 16 A
Dimensions: approx. 70 x 80 x 330 mm
Weight without cord: approx. 1 320 g
max. ambient temperature: 0°C - 40°C
max. humidity: 10% - 90% (relative)
Noise emission (L
pAm
): 83 dB(A)
(DIN-45635-1/04.84 + BG-PAS 26)
1.4 Included parts
1 x shearing clippers with clipper head
1 Set clipper blades R5 (fitted) (top: 17 teeth – bottom: 21 teeth – 3 mm cutting length)
1 Bottle special shearing clipper oil & cleaning brush
1 Set carbon brushes
1 x Operating instructions
1 Case for transport and storage
Options:
- Alternative clipper head for interchanging (for sheep, goats and camelids)
- Various clipper blades (depending on clipper head type)