15
mode.
3. Change of M speed: Press
key to enter main-menu and press direction keys
to move cursor to “M Speed” and
then press direction keys
to select the eight kinds of scan speed. Or left click mouse to switch M speeds.
4. In real-time mode, press
key to exit M mode.
6.5 Image Gain and Dynamic Range Adjustment
6.5.1 Total Gain Adjustment
In real-time mode, press
key to enter main-menu and press direction keys
to move cursor to “Gain: ” in the
display area. Press direction key
to increase image total gain and direction key
to reduce total gain so as to control the
total gain of the entire image.
6.5.2 Near Field Gain Adjustment
In real-time mode, press
key to enter main-menu and press direction keys
to move cursor to “Near: ” in the
display area. Press direction key
to increase near field gain and direction key
to reduce near field gain so as to control the
gain in near field region.
6.5.3 Far Field Gain Adjustment
In real-time mode, press
key to enter main-menu and press direction keys
to move cursor to “Far: ” in the display
area. Press direction key
to increase far field gain and direction key
to reduce far field gain so as to control the gain in far
field region.
6.5.4 Dynamic Range Adjustment
In real-time mode, press
key to enter main-menu and press direction keys
to move cursor to “Dyn: ” in the display
area. Press direction key
to increase the value of dynamic range and direction key
to decrease the value of dynamic range
so as to control the dynamic range of the entire image.
6.6 Selection of Magnification, Frequency, Frame Correlation, Image Post-process, Edge Enhancement, Focus Number, Local
Zoom and Depth Heighten
6.6.1 Magnification Selection
In real-time mode, press
key to enter main-menu and move cursor to “Zoom” and then press direction keys
to
choose eight kinds of magnification.
6.6.2 Frequency Selection
In real-time mode, press
key to enter main-menu and press direction keys
to move cursor to “Freq.” in the
display area. Press direction keys
to realize frequency conversion.
6.6.3 Frame Correlation Selection
In real-time mode, press
key to enter main-menu and press direction keys
to move cursor to “Avg” in the
display area. Press direction keys
to realize four levels of frame correlation.
6.6.4 Image Post-process Selection
In real-time mode, press
key to enter main-menu and press direction keys
to move cursor to “IP” in the display
area and then press direction keys
to obtain corrected image. System default is 2.
6.6.5 Edge Enhancement Selection
In real-time mode, press
key to enter main-menu and press direction keys
to move cursor to “Edge” in the display
area and then press direction keys
to gain four levels of sharpened images. System default is 0.
6.6.6 Focus Selection and Control
In real-time mode and in B, B/B or 4B mode, press
key to enter main-menu and move cursor to “F. Num” and then
press direction keys
to choose from the four focus modes of stage 1(Full process dynamic focus), 2, 3 and 4.
In real-time mode and in B, B/B, 4B, B/M or M mode, press
key to quit menu mode, press direction keys
again to
move the single focus up and down; focus is intelligent in the status of stage 2, 3 or 4, the focal position and focal length can not
be changed in this time.
Note: In B/M or M mode, only allowed choose single focus mode.
6.6.7 Local Zoom and Local Additive Color
