EI MUX-8A, Инструкции по эксплуатации и монтажу

Страница: 19 / 28

15
MUX-8A MUX-8A MUX-8A MUX-8A MUX-8A
Wiring Diagram Wiring Diagram
Wiring Diagram Wiring Diagram Wiring Diagram
B r o w n
R e d
Orange
Yellow
Green
R e d
B l a c k
Orange
DIP Switch Adjustment Slot
3' Ground Lead, connects to Ground.
B l u e
Green
B l u e
Violet
3' Input Lines
To Instrument #1
To Instrument #2
To Instrument #3
To Instrument #4
To Instrument #5
ITo nstrument #6
To Instrument #7
Gray
To GPS #8
(GPS only)
To Ground.
R e d
B l a c k
B l u e
White/Red
White/Yellow
Record Light
Control Switch
9-Pin Male Connector
9-Pin Female Connector
To 12 or 24-Volt Bus
via the 1 amp fuse
used above.
Brown Brown
Yellow Yellow
B l a c k
B l a c k
RS-232 Port.
3' RS-232 (5V) Output Line.
Used for cascade operation.
3' Power Lead, connects to 12 or
24-Volt Bus via a 1 amp fuse.
3' Event Warning Line (Ground to record at
one minute intervels)
Example:
To UBG-16 (Pin 9)
(All 16 channels of data from the
UBG-16 is transmitted down this
one wire. The MUX-8A can
record data from up to 7 different
EI instruments.)