C.
C.
C.
C.
C. Mount the MUX-8A Record Light
Mount the MUX-8A Record Light
Mount the MUX-8A Record Light
Mount the MUX-8A Record Light
Mount the MUX-8A Record Light
Locate the Record Light in the MUX-8A kit. Drill a 5/16" hole in the aircraft instrument panel for the
Record Light and mount the light from the front of the aircraft instrument panel. If you find the Record
Light too bright for night operation, you may want to wire the Record Light's red wire to the aircraft's panel
light rheostat. Also, you can put a 7.5K ohm 5% 1/4 watt resistor in series with the Record Light's red wire
to dim this light. The larger the value of the resistor, the dimmer the light will be.
D
D
D
D
D.....
Mount
Mount
Mount
Mount
Mount The RS-232 Connector
The RS-232 Connector
The RS-232 Connector
The RS-232 Connector
The RS-232 Connector
Locate the RS-232 connector in the MUX-8A kit. Drill a 1/4" hole in the aircraft instrument panel for
the RS-232 connector and mount the connector from behind the aircraft instrument panel.
E.
E.
E.
E.
E. Set the DIP Switches
Set the DIP Switches
Set the DIP Switches
Set the DIP Switches
Set the DIP Switches
Set the 12 DIP Switches located on the side of the MUX-8A Black Box as described in the Operating
Instructions of this manual.
FFFFF.....
Mount the MUX-8A Black Bo
Mount the MUX-8A Black Bo
Mount the MUX-8A Black Bo
Mount the MUX-8A Black Bo
Mount the MUX-8A Black Box
xx
xx
Tie wrap the MUX-8A Black Box to a wire bundle under the aircraft instrument panel using two tie
wraps (one on each side of the box). The slot on the side of the box may need to be accessible to allow for
configuration of the MUX-8A as described in the Operating Instructions portion of this manual.
10
Wire Bundle
Tie Wrap
Tie Wrap
9-pin Male Connector
MUX-8A
9-pin Female Connector
