ehb SMARTdisplay 101
Operating Instructions
©
ehb Errors excepted
Vers. 1.2
13
/
19
4. Error List
The list of errors stores errors that are received from control units via the CAN bus and can be viewed
without a password.
To open the list, click the list of errors symbol
in the navigation bar.
The row of square buttons includes
Delete
and
Detail view
plus four others to filter the list displayed:
You can thus opt to view either the whole list or the
active errors only
, the
errors that are no longer ac-
tive only
or
passive errors only
that have been read from a motor control unit. The filter button cur-
rently active appears with a green background.
The headings in the table and the error texts to be output can be set within the configuration files.
Menu Structure of Error List
Clear Display
Clears all displayed data.
Detailed View
The magnifying glass may be used to show data for an error entry in a
separate page. This view may especially simplify reading of long error
texts.
No Filter
All filters are deactivated. All entries are visible in the table.
Filter “active errors”
Only errors that are active at the present time are shown in the list.
Filter “no longer active
errors”
Only errors that are not active at the present time are shown in the list.
Filter “passive errors”
Only passive errors will be displayed.
Close
Return to settings menu
Each time the device is restarted, a new file for the list of errors can be created. This helps reduce the
risk of data loss in the event that a file could not be properly saved and its content is lost. In addition,
