ehb SMARTdisplay 101
Operating Instructions
©
ehb Errors excepted
Vers. 1.2
11
/
19
3.1 Setting Brightness, Contrast and Language
In Setup, select the symbol
You can now adjust the sliders to make the screen display brighter/darker and to control the contrast.
Note that ‘wrongly’ displayed greyscales (that appear greenish or with very rough transitions) usually
do not mean that the display is faulty, but more probably indicate that the display parameters are
wrongly set. In case of doubt, try moving the bottom slider further to the left.
Select the language required by clicking the appropriate country’s flag.
3.2 Set Date/Time
This setting is only accessible via the password-protected area. The device features a real-time clock
and battery. The clock continues to run even when the device is not connected to terminal 30 (steady
plus battery). It should thus only be necessary to adjust the date or time in exceptional situations. Bat-
tery changes must be carried out by our service department.
To set the clock, first open the Setup menu by clicking the
symbol on the navigation bar. First click
on
and enter the password 915066. The symbols for the protected setup features will appear.
Next, click
. The date/time page will appear:
