7
. After successfully connected, the page will
redirect to the main interface.
6
.
To use 4G connection mode, tap “Customer IP”,
enter the IP address provided by EHANG in the
new interface, tap “OK”, then tap “Connect”, wait
for several seconds until it automatically finishes
connection.
8
. Back to the main interface, check whether the
drone is properly receiving data:
a. Check whether the “Heartbeat” beats;
b. Check whether it’s set to “Self-stabilization”
mode;
c. Check the drone’s detailed status;
d. Check whether the GPS positioning aligns with
the drone's current position.
5
. Tap the Dropdown icon as indicated.
EHANG Pro Software Configuration and Application
Click the Dropdown icon,
you’ll see a popup menu of
Connection Method
19
