EGT EGT-300, Руководство пользователя

Страница: 14 / 20

• How to remove remained electrolytic water
Remove the screw at the rear of the unit and
slide the right-hand panel to open cover.
Remove the plug from the end of the drain
hose on the right side of the electrolyzer.
Rotate the hose low enough to allow the water
inside the electrolyzer to come out.
Push the button to remove any water remaining in the
electrolyzer. ( If you do not use the product for a long time,
be sure to remove any water remaining in the electrolyzer.)
※
Storing electrolyzer for a long period without removing water may contaminate the inside of the
electrolyzer.
Drain hose
Drain hose
End plug
PUSH
After empty the remaining water,
insert end plug into the drain hose and rotate
it to its original position.
Shut o
ff
the adapter valve and the middle valve.
Make sure the water has been completely drained from the system.
Align the cover with the groove of the
body and slide it forward,
then fix it with the fixing screw.
End plug
14
CLOSE
OPEN