INSTALLATION ON THE VEHICLE
25
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
If the device is installed on electric vehicles, add a power line filter, for instance an FN2090-3-06 Schaffner filter.
If requested, the relays present on the board can be connected following the diagram foreseen.
The default configuration indicates that:
Relay 1
(RL1) remains active until the system detects one or more TAGS in the short-range
detection area, i.e. in Warning.
Relay 2
(RL2) is activated with a delay time, which can be configured once relay 1 is activated.
The configuration of the relays can be modified from the advanced settings of the system (contact technical support for
help).
