31
3. LCD Setting and Display
Setting Program:
Program
Description
Selectable option
28
AC output mode
*This setting is only
available when the
inverter is in standby
mode (Switch off).
Single:
When selected, the unit is used in single
operation.
Parallel:
When selected, this inverter is operated in
parallel system. The maximum number of
parallel units is 9.
3DUDOOHOV\VWHPIDXOWFRGHV
:
Fault Code
Fault Event
Icon on
60
Power feedback protection
71
Firmware version inconsistent
72
Current sharing fault
80
CAN fault
81
Host loss
82
Synchronization loss
83
Battery voltage detected different
84
AC input voltage and frequency detected different
85
AC output current unbalance
