5. Thread the couplers about half way into the ball links of the rudder. Hint: remove the ball links from
the rudder horn first to make this step easier and then re-install once the couplers are threaded on. Feed
the loose end of each cable into the cable slots at the rear of the fuselage and feed them forward towards
the servo mount location. A coat hanger with a hook on the end can be useful here if you can’t reach the
cable.
6. Use your radio system to center the rudder servo and attach either the supplied arm or an appropriate
arm for your servo. Thread one of the ball links about half way onto one of the threaded couplers.
Feed the loose end of one of the cables through a brass tube and then through the threaded coupler.
Holding the rudder centered, adjust the cable length as tight as possible while checking the ball link