EFX
(Entertainment FX)
Distributed in the UK by
Tel:
01458.833186
E
-
:
Web:
www.batmink.co.uk
Warranty
Warranty
Warranty
Warranty
This product carries a 1 year warranty from the date of purchase subject to the following
conditions:
•
This warranty is only valid for products used in accordance with the manufacturer’s
Instructions.
•
This product must not be modified or changed in any way. Any such modifications will
invalidate this warranty.
•
Proof of purchase will be required in order to validate warranty.
•
No responsibility or liability is accepted for any direct or consequential damage, loss or
other expense arising from misuse, or incorrect installation or operation of this appliance.
TROUBLESHOOTING
PROBLEM
SOLUTION
Fixture Auto shut off
Check the fan in the fixture. It it is stopped or moving slower than normal, the
unit may have shut itself off due to high heat. This is to protect the fixture from
overheating. Clear the fan of obstructions or return the unit for service
Beam is dim
No Light Output
Chase speed too fast/slow
No Power
No response to audio
Fixture not responding/ re-
sponding erratically
Check optical system and clean excessive dust/grime.
Check the fixture is working in the correct mode, eg soundactive/auto/DMX etc
Check to ensure proper set up of speed adjustment
Check fuse, AC cord and circuit for malfunction
Verify that the fixture is in “Sound Active” mode.
Make sure all connections are secured, use high quality DMX cables.
Install a DMX termination plug.
Reset the fixture by switching on and off
CLEANING THE MACHINE
The machine should be regularly cleaned to ensure the best performance is obtained, it
is recommended after 40 hours use.
1.
Ensure the machine is disconnected from the mains and dismember the spray noz-
zle on the front of the machine.
2.
Empty the fluid tank and refill using a mix of 80% distilled water and 20% white
vinegar.
3.
Switch on and heat the machine and once ready press the smoke button to run the
water vinegar mixture through the machine to clean.
4.
Separately clean the spray nozzle in a white vinegar.
5.
Once everything has been cleaned reassemble the machine and it is now ready for
use.
