EFORT ER12-4-2000, Руководство по эксплуатации и обслуживанию

Страница: 9 / 42

Mechanical Operation and Maintenance Manual for Industrial Robot ER12-4-2000
4
conditions must be confirmed before operation.
Attention
When installing the attached machine on the end effector and the mechanical arm,
the size and quantity of screws specified in this book should be strictly observed,
and the torque wrench should be used to tighten according to the specified torque.
In addition, do not use rusty or dirty screws.
Unspecified tightening and imperfect methods will loosen the screws and cause
major accidents.
Attention
When designing and manufacturing the end effector, it is controlled within the
allowable payload range of the robot wrist.
Attention
The fail-safe protection structure should be adopted, even if the power supply or
compressed air supply of the end effector is cut off, the installation object will not
be released or fly out, and the corner or protruding part should be treated to
prevent damage to people and objects.
Attention
The fail-safe protection structure should be adopted, even if the power supply or
compressed air supply of the end effector is cut off, the installation object will not
be released or fly out, and the corner or protruding part should be treated to
prevent damage to people and objects.
Attention
It is strictly forbidden to supply power, compressed air, and welding cooling water
outside the specifications, which will affect the performance of the robot and cause
abnormal operations, malfunctions, damage and other dangerous situations.