Efkon EFAS, Руководство пользователя

Страница: 36 / 135

Operation of EFAS – Driver and Co-Driver 36 EFAS
You may start your journey.
In this section, you entered your activities for the previous
shift, completed the previous shift and started a new shift.
3.7 Acknowledging Events or Faults
The digital tachograph displays a warning for certain events
or faults. When a warning is displayed, a tone is heard and
the red LED flashes. The tone is repeated for approximately
30 sec. The warning is displayed until it is acknowledged by
pressing
OK
.
A list of EFAS warnings and messages is given in the
section "Messages" on page 77.
Display Additional Information
Use cursor keys

or

to display additional informa-
tion on a warning. It is not possible to acknowledge a
warning when additional information is displayed.
When displaying additional information on a warning,the
first line displays the following information:
• Pictograms of warning
• Number of service ID (SrvID)
• Number of unacknowledged warnings with the same
SrvID.

The second line displays the following information:
• Time and date (UTC): start of event or fault. If the number
of unacknowledged warnings of the same SrvID is > 1,
the start time of the first event or fault will be displayed.
The SrvIDs can be found in the section "Messages" on
page 77.
Note
If a digital tachograph or motion sensor error occurs, a SrvID may
be displayed repeatedly. In this case, the digital tachograph must
be checked in a workshop.