- AB AB600A5010
Instruction Manual
- 9 -
Setting on the operating part of the controls (onboard)
1
Input code number
3112
!
2
Press the
E
key
Parameter
5.0.0.
displayed
3
Press the
E
key
Sir
displayed. The 2 lower segments of the right 7 segment display flash.
4
Press the
>>
key
Parameter
2.9.0.
appears
(Functional cycle cutting
processes)
5
Press the
E
key
Parameter value e.g.
05
appears.
6
Press the
+/-
key
The parameter value can be changed.
7
Press the
E
key
Parameter
4.6.7.
appears
(Selection of motor)
8
Press the
E
key
Parameter value e.g.
3
appears.
9
Press the
+/-
key
The parameter value can be changed.
10
Press the
E
key
Parameter
1.1.1.
appears
(Maximum speed)
11
Press the
E
key
Value of the set speed appears.
12
Press the
+/-
key
The parameter value can be changed.
13
Press the
E
key
Parameter
1.6.1.
appears
(Direction of motor rotation)
14
Press the
E
key
Parameter value e.g.
1
appears.
15
Press the
+/-
key
The parameter value can be changed.
16
Press the
E
key
Parameter
2.7.0.
appears
(Type of position sensor)
17
Press the
E
key
Parameter value e.g.
0
appears.
18
Press the
+/-
key
The parameter value can be changed.
19
Press the
E
key
Parameter
2.7.2.
appears
(Transmission Ratio)
20
Press the
E
key
Parameter value e.g.
1000
appears.
21
Press the
+/-
key
The parameter value can be changed.
22
If parameter
270 =0 or 5
, or the check of the
transmission ratio is already done, continue with
Point 30.
23
Press the
E
key
PULY
is displayed.
(Check the transmission ratio)
24
Move pedal forwards
Let the drive run until ready (
rdy
) is displayed.
For a maximum speed that is too high, an error
message A12 is generated.
Push button
E
as
often as needed until parameter
111
(Point 12) is
reached again to set the permitted maximum
speed.
25
Press pedal to position 0
(neutral)
The check is complete.
26
When parameter
270 ≠ 6
, continue with Point
31.
27
P0 o
is displayed (
o
in red).
(Setting the reference position)
28
Rotate the hand wheel in the running direction until
o
extinguishes
*
.
Set reference position (e.g. height of the stitch plate, lower dead point).
29
Press the
E
key
Parameter
4.5.1.
appears
(Position 1 leading edge,
position 1 trailing edge is
automatically set 60° higher)
30
Press the
E
key
Angle from position 1 is displayed.
31
Turn the hand wheel
Set position 1 (at least 1 rotation
*
).
32
Or
press the
+/-
key
The parameter value can be changed.
33
Press the
E
key
Parameter
4.5.3.
appears
(Position 2 leading edge,
position 2 trailing edge is
automatically set 60° higher)
34
Press the
E
key
Angle from position 2 is displayed.
35
Turn the hand wheel
Set position 2 (at least 1 rotation
*
).
36
Or
press the
+/-
key
The parameter value can be changed.
37
Upon pressing the
E
key once more the program returns to parameter
2.9.0.
!
38
Press the
P
key twice
The system exits the SIR routine.
*) All operations carried out b y turning the hand wheel must always b e carried out in the direction of rotation set up on the
machine. Under no circumstances should you turn against the machine direction.
Содержание AB600A5010
