Titanium Ti180 M484 Development Kit User Guide
Board Functional Description
The Titanium Ti180 M484 Development Board contains a variety of components to help you
build designs for the Titanium Ti180 FPGA.
Figure 1: Titanium Ti180 M484 Development Board Block Diagram
USB
Type-C
Connector
2 x NOR Flash, 256 Mbit
FTDI
FT2232H
JTAG Header
2 MIPI RX x4, GPIO
QSE Connector
2 MIPI TX x4, LVDS, GPIO
QSE Connector
2 MIPI TX x4, LVDS, GPIO
QSE Connector
2 MIPI RX x4, LVDS, GPIO
QSE Connector
Low Pin-Count
FPGA Mezzanine Card
Connector
33.33 MHz, 50 MHz,
74.25 MHz Oscillators
LPDDR4/LPDDR4x x32,
256 Mbit
Ti180 FPGA
Micro SD Card Slot
6 User LEDs
2 User Pushbuttons
25 MHz Oscillator
(Dedicated MIPI)
Features
•
Efinix Ti180M484I3 FPGA in a 484-ball FineLine BGA package
•
LPDDR4 or LPDDR4x x32 bits memory:
—
256 Mb
—
Up to 2.0 Gbps double-data rate (LPDDR4x)
—
Up to 1.6 Gbps double-data rate (LPDDR4)
•
2 x 256 Mbit SPI NOR flash memories
•
4 x MIPI, LVDS, and GPIO high-speed QSE connectors to attach the daughter cards
included in the kit or your own custom daughter cards
•
Micro-SD card slot
•
FPGA mezzanine card (FMC) with low pin-count connector (LPC)
•
USB Type-C connector to configure the development board
•
33.33, 50, and 74.25 MHz oscillators for Ti180 PLL input
•
User LEDs and switches:
—
6 LEDs
—
2 pushbutton switches
•
Power:
—
12.0 V power supply connector
—
On-board regulator sources: 0.62 V, 0.85 V, 0.95 V, 1.1 V, 1.2 V, 1.8 V, 3.3 V, 5.0 V
•
Power good and Ti180 configuration done LEDs
www.efinixinc.com
6
