Titanium Ti180 M484 Development Kit User Guide
Using the Multi-Input Video Stream Design
The design has five possible display outputs. You can change the display output by pressing
the board's pushbutton or the computer keyboard keys.
Using Keyboard Keys to Change the Display Output
You need to set up a terminal on your computer before you can use this feature.
1.
Open terminal software on the computer. You can use any Windows or Linux terminal
application such as PuTTy, Tera Term, Minicom, and others.
2.
Select the available USB serial COM port and set the following:
•
Baud rate: 115200
•
Data: 8-bit
•
Parity bit: No
•
Stop bit: 1
3.
Press pushbutton SW1 to reconfigure the example design. The terminal displays the
following output:
**********TI180 OOBTest*********
Cameras Initial!
Pi Camera 0 Initial Done !
Assert failure !
Pi Camera 1 Initial Error !
Assert failure !
Pi Camera 2 Initial Error !
Assert failure !
Pi Camera 3 Initial Error !
4.
Press keys 1, 2, 3, 4, or 5 on your keyboard to select the display output described in
on page 30.
www.efinixinc.com
29
