29
Installation and Service Guide
Using the E-35A
Using the E-35A
The following user interfaces are available for the E-35A:
•
Fiery QuickTouch on the front of the E-35A
Fiery QuickTouch is a seven-inch LCD color touch screen interface for the E-35A.
•
The printer touch panel
•
Fiery NX Station, including a monitor, keyboard, and mouse.
Note:
The Fiery NX Station (monitor, mouse, and keyboard) is provided as an optional feature.
Fiery Ticker
When you log on to the E-35A using the monitor or Remote Desktop Connection, Fiery Ticker automatically starts
showing the status bar.
Figure 10:
Fiery Ticker status bar
You can perform the following tasks using the Fiery Ticker:
•
Monitor the activities of the E-35A and printer using the Fiery Notes.
•
Manage the E-35A by using Command WorkStation or WebTools
•
Shut down, restart, or reboot the E-35A
For details, see the Fiery Ticker Help. To access the Fiery Ticker Help, click “>>” icon at the upper left corner of the
screen, and select
Help
.
Printing E-35A pages from the monitor, keyboard, and mouse
This section describes how to print the Test Page, Server Configuration page, and other Fiery pages.
•
Test Page
verifies that all components of the E-35A to printer interface work. The Test Page is a pre-stored page
stored on the E-35A hard disk drive.
Note:
Information regarding Test Page refers to PS Test Page or PCL Test Page. For more information, see
Configuration and Setup
, which is part of the user documentation set.
•
Server Configuration page
provides general information about the hardware and software configuration of the E-
35A, the customer’s current settings for Setup, the current calibration, and the IP address of the E-35A.
Printing the Server Configuration page can be helpful during installation, Setup, and service. After installing the E-
35A (including connecting to the network) and before default settings are changed in Run Setup, you can obtain a
record of the defaults by printing the Server Configuration page.
Menu
Access
