Double row LED bar
USER’S GUIDE EFFI
-SMART
Version 2.1.2020
Last update:
June 17, 2020
Mini Parc du Verger
–
Bâtiment E
1 Rue de Terre Neuve
91940 LES ULIS, FRANCE
Tel: +33 9 72 38 17 80
Fax: +33 9 72 11 21 69
Email: [email protected]
Page 2 / 4
EFFI-SMART
-WW
-XXX
-YY
-ZZ
-
…
Number of LED
Wavelength (nm)
Windows
Lens position
Option
6
12
36
405
465
525
625
850
000
(White)
TR
(Transparent)
SD
(Semi-diffusive)
OP
(Opaline)
P0
(no lens)
P1
(45°)
P2
(25°)
P3
(10°)
LS
(linescan)
POL
(polarizer)
Regardless of maintenance, the product must be switch off.
The product is ESD sensitive. Should you open it, take care about ESD matters (use a conductive wrist strap attached to a good
earth ground, use an approved anti-static mat to cover your work surface).
CHANGE OPTICAL CONFIGURATION
(Scheme: P1 configuration)
To handle the optical components, wearing gloves is strongly recommended.
To clean the optical components: Use compressed air duster if there is dust.
To remove marks on the lens or the window, just a drop or two wiped of alcohol-based lens cleaning fluid in a gentle circular motion with a cleaning
tissue. Always apply the fluid to a tissue rather than to the lens itself.
P0 : Without lens
P1 : screw + 2* lens
P2 : screw + lens +
spacer
P3 : screw + lens + 2*spacer
Reference
Maintenance
Take out the plastic cover
2
Take out the 2 spacers
4
Screw
2 Spacers
Lens
Torx Screwdriver
Size : T6
Unscrew the screws on the block of lenses
3
Replace the lenses in the right position
5
Screw the block of lenses & the cover
0.2 N.m
6
Unscrew the screws
1
Option
→
