UPS: MKD 700
– 3000 VA RT (XL)
Introduction
In some countries, the exemption or the limitation of concomitant
consequential damage is not permitted by law so that the aforementioned
declaration does not enter into force.
2.
Safety instructions
2.1
Introduction
The UPS is a device that has been produced according to the rules and
regulations of technology for an uninterruptible power supply.
The device is safe when used properly and under consideration of the safety
requirements and instructions provided in this operating manual.
2.2
Proper use
The UPS and its related components may only be used for purposes in
accordance with its design
– to provide a primary energy source for electrical
devices and a short-term supply from a secondary energy source for electrical
devices which does not exceed the nominal power in its entirety. Any other use
is considered
improper
and can lead to injury of person or property and/or
damage to the device!
The device is not designed for use
–
in explosive;
–
in dusty or humid;
–
in radioactive or;
–
in biologically or chemically contaminated atmospheres!
For information about the respective IP protection class of the device please
contact our service centers.
In addition, the device class must be noted with
regard to “electromagnetic
compatibility” (EMC). For this, see the standard DIN EN 62040-2.
The UPS is a
Class C2 or C3
device. Take note of the information about the
device class in the provided specifications (
13 Technical dat). UPS systems