Efco swaploader SL-105, Руководство по эксплуатации и частям

Страница: 36 / 82

Section II: Installation - Accessories
2.8.INS.ACC.LEDLB
NOTE:
1. PRIOR TO ANY WELDING, CONSULT THE TRUCK MANUFACTURE FOR ANY SPECIAL PRECAUTIONS
THAT MAY NEED TO BE TAKEN. TYPICALLY THE BATTERIES MUST BE DISCONNECTED AND THE
GROUND LEAD FROM THE WELDER SHOULD BE AS CLOSE TO THE PART BEING WELDED TO AVOID
THE POSSIBILITY OF ARCING ACROSS BEARINGS, GEARS, ETC.
Figure 3
MATERIAL LIST FOR 51H68
ITEM PART # QTY DESCRIPTION WT-lb/ea.
1 51H69 2 Stub Light Bar Weldment 8.54
2 63H08 1 Center Plate 27.33
3 00P44 6 3/8-16 x 1 1/2 HHCS 0.07
4 00P34 6 3/8-16 Locking Hex Nut 0.02
5 00771 6 Ø3/8 Flat Washer 0.01
6 01P18 4 5/8-11 x 3 HHCS 0.35
7 00P81 8 #8-32 x 1 RHMS -
8 00P82 8 #8-32 Hex Nut -
9 00P83 8 #8 Lock Washer -
10 40P32 1 Lic. Light Assy (w/o Harness) -
11 40P34 REF License Lamp Harness -
12 40P35 REF Id Light Bar Rail -
13 40P37 REF Id Light Bar Harness -
14 40P38 REF Junction Box Assembly -
15 40P39 REF Light Kit Assembly 23.00
16 40P40 REF Right Tail Light Module w/ Harness -
17 40P41 REF Left Tail Light Module w/ Harness -
18 40P42 REF Side Marker Lamp -
19 40P43 REF Stop, Turn, & Tail Lamp -
20 40P44 REF License Lamp -
21 40P45 REF Back-Up Lamp -
22 40P46 REF ID Light Bar Lamp -
Figure C
2-24