Efco DS 240 S, Информация о продукте

Страница: 6 / 7

TECHNICAL SPECIFICATIONS
MODEL 1.
DS 240 S DS 240 T
ENGINE
TYPE Emak 2-stroke / EURO 1
DISPLACEMENT cm
3
21,7
BORE x STROKE mm x mm 32 x 27
MAXIMUM POWER OUTPUT HP/kW (rpm) 1,2 / 0,9 (8500)
MAXIMUM TORQUE Nm (rpm) 1,2 (6500)
IDLING SPEED rpm 2800-3100
MAXIMUM NO LOAD SPEED rpm 10300
HOURLY FUEL CONSUMPTION (at max power output) g/h (rpm) 410 - 450 (8500)
IGNITION SYSTEM
TYPE Digital with variable ignition advance and speed limitetor
COIL WALBRO MBU53
SPARK PLUG NGK CMR7H
EASY START Yes
FUEL & LUBRICATION SYSTEM
CARBURETTOR WALBRO WT-1041
FUEL Compatibility with alkylate mix
FUEL TANK CAPACITY l 0,4
AIR FILTER Generously sized cloth
PRIMER Si
TRANSMISSION SYSTEM
DRIVE SHAFT ( Ø ) “Outer / Inner” mm Ø24 (Ø7internal rigid shaft)
BEVEL GEAR PAIR Pin male M10x1,25 sx
CLUTCH COVER Aluminium
CLUTCH (DIMENSION) mm Yes
ERGONOMICS
HARNESS Single harness Simple with cushion
FRONT HANDLE Ergonomic loop and handles clad in soft rubber ergonomic aluminium handlebar adjuster knob
REAR HANDLE Ergonomic with moulded rubber grips
ON / OFF SWITCH A button (always on)
ANTI-VIBRATION SYSTEM
Nylon antivibration rubber on the
clutch cover
Nylon antivibration rubber on the
clutch cover + 2 on handlebar support
CUTTING SYSTEM
STANDARD CUTTING DISC Steel disc cutter with 3 teeth Ø 10” / 255 mm, thickness1,8 mm
STANDARD NYLON STRINGHEAD Load &Go Ø130mm line 2,4 mm
CUTTING GUARD - CUTTING WIDTH (with stringhead) Ø mm 370
IN COMPLIANCE WITH
WEIGHT (Without cutting tools) kg 4,5 5,25
POWER-TO-WEIGHT RATIO kg / Kw 5,0 5,8