It's an Emak S.p.A. trademark Member of the Yama Group
Via E. Fermi, 4 • 42011 Bagnolo in Piano (Reggio Emilia) Italy
Tel. +39 0522 956611 • Fax +39 0522 951555
[email protected] • www.efco.it
MODEL
1.
DS 240 S
DS 240 T
ENGINE
TYPE
Emak 2-stroke / EURO 1
DISPLACEMENT
cm
3
21,7
BORE x STROKE
mm x mm
32 x 27
MAXIMUM POWER OUTPUT
HP/kW (rpm)
1,2 / 0,9 (8500)
MAXIMUM TORQUE
Nm (rpm)
1,2 (6500)
IDLING SPEED
rpm
2800-3100
MAXIMUM NO LOAD SPEED
rpm
10300
HOURLY FUEL CONSUMPTION (at max power output)
g/h (rpm)
410 - 450 (8500)
IGNITION SYSTEM
TYPE
Digital with variable ignition advance and speed limitetor
COIL
WALBRO MBU53
SPARK PLUG
NGK CMR7H
EASY START
Yes
FUEL & LUBRICATION SYSTEM
CARBURETTOR
WALBRO WT-1041
FUEL
Compatibility with alkylate mix
FUEL TANK CAPACITY
l
0,4
AIR FILTER
Generously sized cloth
PRIMER
Si
TRANSMISSION SYSTEM
DRIVE SHAFT ( Ø ) “Outer / Inner”
mm
Ø24 (Ø7internal rigid shaft)
BEVEL GEAR PAIR
Pin male M10x1,25 sx
CLUTCH COVER
Aluminium
CLUTCH (DIMENSION)
mm
Yes
ERGONOMICS
HARNESS
Single harness
Simple with cushion
FRONT HANDLE
Ergonomic loop and handles clad in soft rubber ergonomic aluminium handlebar adjuster knob
REAR HANDLE
Ergonomic with moulded rubber grips
ON / OFF SWITCH
A button (always on)
ANTI-VIBRATION SYSTEM
Nylon antivibration rubber on the
clutch cover
Nylon antivibration rubber on the
clutch cover + 2 on handlebar support
CUTTING SYSTEM
STANDARD CUTTING DISC
Steel disc cutter with 3 teeth Ø 10” / 255 mm, thickness1,8 mm
STANDARD NYLON STRINGHEAD
Load &Go Ø130mm line 2,4 mm
CUTTING GUARD - CUTTING WIDTH (with stringhead)
Ø mm
370
IN COMPLIANCE WITH
WEIGHT (Without cutting tools)
kg
4,5
5,25
POWER-TO-WEIGHT RATIO
kg / Kw
5,0
5,8