EES USM series Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 46

EES USM series Скачать руководство пользователя страница 40

Parameterisation

Page 40 of 46

MSM-USM2G-BA-UK-001

5.2.4.6 Submenu LED-colour selection

Fig. 5.19: Page LED-colour

On this page the LED colours for the operation modes “operation indication” and “fault annunciation”

of each channel can be defined.

Operation indication

For both states OFF and ON the LED can be triggered as follows:
LED OFF or colour: RED, GREEN.

Fault annunciation

For fault annunciation signals the colour for the signal conditions OFF and ON can be defined as
follows:
LED OFF or colour: RED, GREEN.
For the state flashing the colour of the state ON is selected automatically.

5.2.5 Menu IEC 61850

In this menu settings can be done that affect the IEC 61850 interface of the annunciator.
For detailed information please refer to the separate interface description



MSM-S850-BA-UK

.

5.2.6 Menu IEC .. 101/104

In this menu settings can be done that affect the IEC 60870-5-101/104 interfaces of the annunciator.
For detailed information please refer to the separate interface description



MSM-S850-BA-UK

.

Please note that for the states OFF and ON of one channel different colours need to be
defined.

«
...
38
39
40
41
42
...
»

Содержание USM series















































Отзывы:

Нет отзывов