EemaX LavAdvantage, Руководство по установке

Страница: 10 / 16

10
5) UNIT OPERATION
Using the Eemax LavAdvantage Control Functions
Using the Eemax LavAdvantage is EASY. There are only 2 buttons: “–“and “+”. Moving through the functions
requires a minimum of effort – just follow along!
During operation the unit will show the current set point temperature and will display this temperature for 5
minutes after the unit is active.
Factory temperature setpoints:
- Standard heaters, S models: 120°F
- Units 3.5 kW and below: 105°F
- ML models: 110°F
- EE models: 90°F
SETTING TEMPERATURE
To INCREASE temperature, tap the “+” button repeatedly, or hold the “+” down to INCREASE the temperature
quickly. To DECREASE temperature, tap the “–” button repeatedly, or hold the “–” down to DECREASE the
temperature quickly.
ADVANCED FUNCTIONS
To access the ADVANCED FUNCTIONS menu:
With the display showing the current setpoint temperature, press BOTH “+” AND “–“ buttons simultaneously for
3 seconds and the display will show:
FLOW RATE (GPM or LPM)
Pressing “-“ at any time will display screen title*. Continue tapping the “+” button to display the following (in
this order)
INLET TEMPERATURE (cold water temperature) (°F or °C)
OUTLET TEMPERATURE (hot water temperature) (°F or °C)
Remove screw to access user interface