Eela Audio D3, Быстрый старт

Страница: 21 / 23

Eela Audio D3 manual, October 2009 20
Setting up a HYBRID INTERFACE:
Connect the hybrid to one of the line inputs in this case we will use channel 5 input LINE A. In most
cases a telephone hybrid is mono so connect its output to both inputs and set the ‘config:’ to mono
For this example we are using AUX4 as return to the hybrid so connect the AUX4 output to the input
of the hybrid with both L and R connected.
We will be using GPI 8 for “ring detect” and GPO 8 for “hybrid ON” (modem). Connect the hybrid
accordingly.
Briefly pushing the grey channel 5 “select” button that opens the channel settings window in the
display.
Push the red “config” button on the touch screen that will open the settings window:
Select the input being LINE A, and briefly touch the “Type” box, the background will turn yellow, with
the rotary select “hybrid” and push the rotary button to confirm the selection.
Briefly push the “TB-output” box and with the rotary select “AUX4” being your return or Cleanfeed.
Confirm the selection by pushing the rotary.
Select the “MAIN A” and or the “MAIN B” box depending on the destination of the signal.
EXIT this screen and go to the AUX settings and make sure the level of AUX 4 is completely turned
down to mute.
Of all inputs in all other channels that are part of or will be part of the return signal open AUX4 to the
desired level, in most cases nominal level.
Please note all AUX levels depend on and are stored with the selected INPUT so if you switch inputs
on a channel you have adjust that level also!
Setup your Talkback microphone in the SYSTEMS menu ‘TB input ch:’ as described earlier.