Eela Audio D3, Быстрый старт

Страница: 14 / 23

Eela Audio D3 manual, October 2009 13
METERS:
Currently only active PPM characteristics.
The standard alignment of the mixer outputs:
0 PPM is + 6 dBu at the balanced analog outputs
+10 PPM is 0 dBFS
General specifications:
The D3 comes with 19” rack mounts, unit can be rack mounted without the need for extra space
above the unit to allow room for connectors.
6 microphone inputs, balanced on XLR, switchable 48 Volt phantom powering,
2 AES/EBU digital inputs, balanced XLR with sample frequency converters, range: 22kHz.> 200 kHz.
2 x 8 analogue line inputs on RCA cinch connectors,
2 stereo main outputs on balance XLR connectors, nominal output level +6 dBU.
2 AES/EBU main digital outputs 48 kHz sample rate on XLR,
4 stereo Aux. / cleanfeed / foldback outputs on 6,3 mm Jack, nominal output level 0 dBU.
Monitor output on Jack, nominal output level 0 dBU.
Headphones output on the front panel and on the back on 6,3 mm jack.
USB serial connection,
Both RJ45 connectors are for future expansion.
D-type 25 pin female with 8 opto isolated inputs and 8 outputs. (Option: 2 x 8 GPI/O in 19”
rackmount)
Power Supply:
12 .. 24 Volts DC, approx. 1A, on XLR-4
Unit comes with wide range mains adapter, 100 .. 240 V AC, 47/63 Hz,