HD491 Smart Encoder
7 Copyright © 2000-2014 EEG Enterprises, Inc.
All Rights Reserved.
Section 3: Encoder Operation
Front Panel Menus
The front panel LCD screen and Control Pad are used to configure
encoder settings and networking, perform flash updates, and access many
add-on software features installed in the unit. The interface is organized
in a series of hierarchical menus; use the
LEFT
and
RIGHT
keys to
scroll between menu options and the
ENTER
or
DOWN
keys to select
options or enter sub-menus. Press the
CANCEL
key from any menu
screen to return to the top of the menu hierarchy.
In the HD491, when the front panel menu is inactive, the display will
revert to a status screen. The top line shows the availability and format of
the video signals at the Master and Aux Video Inputs in the left and right
corners, respectively. The bottom line shows the current data sources for
the primary and secondary HD caption Services. Press any key on the
Control Pad to return to the top-level menu from the status screen.
System Setup Menu
LCD Display
The LCD Display menu contains display options for the front panel
LCD screen.
LCD Contrast
sets the contrast level of the display screen. The
value ranges from 0 (lightest) to 20 (darkest). Use the
UP
and
DOWN
keys to make changes, which will take effect on the screen
immediately. When you are finished making changes, use the
ENTER
key to exit the menu and save changes, or the
CANCEL
key to exit the menu and reject changes.
LCD Backlight
sets the brightness level of the display screen’s
backlighting. The value ranges from 0 (darkest) to 50 (brightest).
Use the
UP
and
DOWN
keys to make changes, which will take
effect on the screen immediately. When you are finished making
changes, use the
ENTER
key to exit the menu and save changes or
the
CANCEL
key to exit the menu and reject changes.
L21 Pedestal
Turns the Line 21 Pedestal feature on and off. Use the
UP
and
DOWN
buttons to select ‘On’ or ‘Off’ and
ENTER
or
CANCEL
to exit.
eeg
