HD491 Smart Encoder
Copyright © 2000-2014 EEG Enterprises, Inc. 16
All Rights Reserved.
iCap™
Every HD491 unit ships with ready-to-use iCap™ software. The iCap™
software is turned off by default. To begin using the iCap™ software,
enter your encoder’s unique iCap™ account login on the configuration
page, press ‘Apply’, and then press ‘Start’.
iCap™ account logins can be obtained by contacting EEG Sales or
Technical Support, and are now free with each HD491 unit.
For complete information on using iCap™ on the HD491, refer to the
iCap™ manual which can be found in the ‘Manuals’ section on the
configuration web pages.
Logs
The Logs tab on the HD491 web page will show daily event logs for
installed modules, including iCap™ and XDS/PSIP network insertion.
Optional Modules
A wide variety of optional modules are available for the HD491
platform. Some of the most popular are pre-installed on new units,
though some pre-installed modules still require a license key to activate.
See Section 4 for an up-to-date list of available modules.
