40
Location
Select Int. memory if you wish to store the test results on the onboard instrument memory. Select
USB disk if you wish to save the test results on an external USB flash drive. For best results use the
USB flash drive provided by Associated Research.
Test Result
Select PASS to save the results of the steps that passed. Select FAIL to save the results of the steps
that failed. Select ALL to save all the test results. Selecting NONE will not save any results to the
internal memory.
Results Limit
You can set the Results Limit. Select from 0 up to 100000 with 0 being OFF. Selecting 0 will set the
Results limit to OFF which means you can store as many results as desired until you reach the
maximum capability of 100000 results.
Time Limit
The Time Limit allows you to set a time period in days for which the test results will be stored.
After the Time Limit is exceeded no test results will be stored on the internal memory of the
instrument and a warning pop-up message will appear at the end of a test alerting you “The time
limit of the results has exceeded the Time Limit”.
4.3.4 User Interface
Содержание SE 7430
