EEC 6900S Series, Руководство пользователя

Страница: 9 / 29

3
CHAPTER 2. GETTING STARTED
This section contains information for the unpacking, inspection, preparation for use and
storage of your EEC product.
。
2.1 Unpacking and Inspection
Your instrument was shipped in a custom foam insulated container that complies with ASTM
D4169-92a Assurance Level II Distribution Cycle 13 Performance Test Sequence
If the shipping carton is damaged, inspect the contents for visible damage such as dents,
scratches, or broken display. If the instrument is damaged, notify the carrier and EEC's
customer support department. Please save the shipping carton and packing material for the
carrier’s inspection. Our customer support department will assist you in the repair or
replacement of your instrument. Please do not return your product without first notifying us.
Please retain all of the original packaging materials.
2.2 Preparation For Use
2.2.1 Power Requirements
This instrument requires a power source of 110 volts AC ± 10%, 50/60 Hz single phase or 220
volts AC ±10%, 50/60 Hz single phase. Please check the rear panel to be sure the proper
switch setting is selected for your line voltage requirements before turning your instrument
on.
Do not switch the line voltage selector switch located on the rear panel
while the instrument is on or operating. This may cause internal damage
and represents a safety risk to the operator.
2.2.2 Power Cable
Before connecting power to this instrument, the protective ground (Earth)
terminals of this instrument must be connected to the protective conductor
of the line (mains) power cord. The main plug shall only be inserted in a socket outlet
(receptacle) provided with a protective ground (earth) contact. The main terminal shall only
be connected to a connector provided with a protective ground (earth) contact. This
protective ground (earth) must not be defeated by the use of an extension cord without a
protective conductor (grounding).
!!! Please must use the Class I product to be as the load.
CAUTION
WARNING