TYPICAL WIRING DIAGRAM
WARNING!: Ensure the Remote Sensing Wires are connect to the
correct battery to prevent damage caused by overcharging.
D E E P S E A E L E C T R O N I C S
DSE9462 Installation Instructions
053-189
ISSUE 1
DANGER OF DEATH: LIVE PARTS exist within the DSE9462 enclosure.
The enclosure cover must not be removed.
INSTALLATION
The battery charger is designed to be mounted within a control panel, utilising the
integral mounting holes. The battery charger is fit-and-forget. It may be
permanently connected to the supply and the load, with no requirement to disable
the charger during times of heavy load (such as engine cranking) or when in
parallel with a charging alternator.
BATTERY SUITABILITY
The charger is factory set by DSE to suit Lead Acid batteries and may be ordered
to suit other battery types. Additionally, configuration is possible using the DSE
Configuration Suite PC Software to suit other battery types.
Care must be taken to ensure the batteries connected to the charger are of the
correct ‘technology’ to suit the setting of the charger.
INDICATIONS
The DSE9462 Battery Charger features LED indicators to show the battery charger
Status.
Deep Sea Electronics Plc.
Tel:+44 (0)1723 890099
Fax: +44 (0)1723 893303
Email: [email protected]
Web: www.deepseaplc.com
Deep Sea Electronics Inc.
Phone: +1 (815) 316-8706
Fax: +1 (815) 316- 8708
Email: [email protected]
Web: www.deepseausa.com
