Edwards & Co PA0100, Инструкция по эксплуатации

Страница: 8 / 14

Installing the base using ISOFIX
Insert the ISOFIX installation guides in
between the seat fabric as shown in
Figure (1).
These guides make installing the base
easier by showing the location of your
vehicle’s ISOFIX anchors.
Insert the ISOFIX fixing lock through the installation guides and
connect them with the ISOFIX anchor in your vehicle as shown in
Figure (3) and (4).
You should hear a distinct
CLICK!
when the lock connects to the
ISOFIX anchor.
Figure (5) pictures the correct setting displayed on the fixing lock
upon a correct installation. A green indicator will be shown once
installed as indicated.
WARNING - always check the indicator matches Figure (5) before
use. Double check the connection by pulling the base against the
anchor. There should be a very strong connection.
8
Open the base stand by pressing the
stand release button and moving the
locking clip from position 2 to 1 as
shown in Figure (2).
NO
YES
3 4
5
2 1
1
2
designed in NZ